提示： sRD fA4/TF  
Warning: Invalid geometry! Negative edge count! ;`#R9
\C=h  
   TracePro can continue only by removing this object from the raytrace. uTR
^K=Ve  
   Object: Object 2 has been removed from the raytrace. uem-fTG  
   This object must be replaced with valid geometry for inclusion in the raytrace. z;S-Q,  
DD$>3`  
!}TsFa  
建模的時候沒有問題啊，為什么還會出現(xiàn)這樣的情況呢？

檢查一下Object 2，模型有些問題。