老司机午夜精品_国产精品高清免费在线_99热点高清无码中文字幕_在线观看国产成人AV天堂_中文字幕国产91

切換到寬版
  • 廣告投放
  • 稿件投遞
  • 繁體中文
    • 2362閱讀
    • 8回復

    [討論]MacLeod runsheet [復制鏈接]

    		 上一主題 下一主題
     
    發帖
    19
    光幣
    5
    光券
    0
    只看樓主 倒序閱讀 樓主  發表于: 2022-01-19
    各位大佬們，請教一下，這個動態加工因子如何理解，有什么作用！ 8J~1-;  
    (+u39NQV  
     
    分享到
    離線ouyuu
    發帖
    555
    光幣
    3322
    光券
    1
    只看該作者 1樓 發表于: 2022-02-23
    這個是麥克勞德幫助文件里的說明：Dynamic Tooling Factor: Reset for each Layer when cleared and the tooling factor is read from a table file then the tooling factor will be a function of the accumulating thickness of layers of the appropriate source. This simulates the gradual depletion of material from the source as coating deposition proceeds. There may be circumstances where the tooling factor should be a function of the individual layer thickness only. This will be selected when the box is checked. Then the accumulated thickness is set to zero at the start of each layer. This option applied only if tooling factor tables are in use. +|@rD/I6