zemax設(shè)計菲涅耳透鏡時，  fresnel1參數(shù)中+Depth/-Freq、Radius、conic分別指什么？

Allow me to repost  here for depth/frequency setting Yd'ke,Je  
The main fresnel lens types are: y0]O 6.{  
WH*&MIjAr/  
    * Constant groove depth. !vw0Y,F&  
    * Contant groove pitch types. 9m4|1)  
/.bwwj_;  
So if your depth is fixed you will define +ve value in the cell and to specify the "height" or "depth" of each groove feature. If the frequency of the groove is fixed then you use -ve value. Say putting down - 5 this implies that there are 5 grooves with a unit length. L4%LE/t|e  
o~p^`5#  
For radius, this is the curvature of the base surface. If you define one such lens and chaneg the radius and you shall see what it means. A graphic tells lounder than words. i9tM]/SP  
{wySH[V  
For conic: check conic section using Wikipedia and you should see what conic constant means. uyIA]OtyN  
jT',+  
va<pHSX&I@  

Thanks very much!

hopebox確實無處不在啊，能不能加你qq？

Thanks very much

hopebox真的是無處不在