000落月000:哪位大神能做勻光優化啊 (2013-05-21 16:18)  I):!`R.,  

r:&`$8$  
沒辦法，只能用非序列

只能用非序列，求高手幫一下啊

非序列優化，在zemax說明書里有很詳細的說明，看不懂英文，可以看高老師的光學設計指引帖第9貼。里面有非序列優化的詳細操作步驟。 .9md~j:o^s  
根據我個人的使用經驗，非序列優化的能力較差，與初始結構相比無重大改善。

不懂。。。

沒有NSDD的說明哦�。�！

我在用非序列優化時也出現問題了呢，不知是模型建的有問題還是優化哪里設置的不對，優化完基本系統基本沒變，想要的結果也沒有達到

同問，以前沒用過非序列的，現在好不容易把結構弄對了，可是不會優化

lingchen12:同問，以前沒用過非序列的，現在好不容易把結構弄對了，可是不會優化 (2013-07-16 18:25)  4Z/f@ZD  

:sCqjz  
我也是，好不容易結構出來了，非序列優化好迷茫啊

蘊藉之身:沒有NSDD的說明哦 (2013-05-16 17:07)  qBCK40   

[B|MlrZ  
Non-sequential incoherent intensity data. Surf defines the surface number of the NSC group Y_
QH&GZ  
(always 1 in pure NSC systems). Det# refers to the object number of the desired detector. If Det# 4!LCR}K  
is zero, then all detectors are cleared. If Det# is less than zero, then the detector defined by the y>aZXa  
absolute value of Det# only is cleared. zA1lca0HK  
For Detector Rectangles, Detector Surfaces, and all faceted detectors: If Pix# is a positive integer MzL1Bh!M  
greater than zero, then the data from the specified pixel is returned. Otherwise, the following data p8]68!=W\F  
is returned depending upon the value of Pix#: /jRRf"B  
0: Sum of the total flux in position space, average flux/area in position space, or total flux in angle V,G|k!!  
space for all pixels for that detector object, for Data = 0, 1, or 2, respectively. B~_d^`  
-1: Maximum flux or flux/area. t8dm)s[r8  
-2: Minimum flux or flux/area. sx`O8t  
-3: Number of rays striking the detector. QI3Nc8t_2  
-4: Standard deviation (RMS from the mean) of all the non-zero pixel data. |0%+wB  
-5: The mean value of all the non-zero pixel data. P<f5*L#HD  
-6, -7, -8: The x, y, or z coordinate of the position or angle Irradiance or Intensity centroid, E8~}PQW:I  
respectively. >mjNmh7  
-9,-10, -11, -12: The RMS radius, x, y, or z distance or angle of all the pixel data with respect to the $]/Zxd  
centroid. l'TWkQ-  
Data is 0 for flux, 1 for flux/area, and 2 for flux/solid angle pixel. Only values 0 and 1 (for flux and Yk5}`d!:  
flux/area) are supported for faceted detectors. See “Optimizing with sources and detectors in nonsequential r}jGUe}d  
mode” on page 502 for complete details.

太熬了我