| hopebox |
2010-06-10 21:36 |
Allow me to repost here for depth/frequency setting wj9 Hh
The main fresnel lens types are: uZ+vY F^
seA=7c5E
* Constant groove depth. s=1w6ZLD
* Contant groove pitch types. ^K[[:7 Aem
Rip[
So if your depth is fixed you will define +ve value in the cell and to specify the "height" or "depth" of each groove feature. If the frequency of the groove is fixed then you use -ve value. Say putting down - 5 this implies that there are 5 grooves with a unit length. Eg0qY\'
tNYCyw{K
For radius, this is the curvature of the base surface. If you define one such lens and chaneg the radius and you shall see what it means. A graphic tells lounder than words. 1G
63eH)!
79} Qj7
For conic: check conic section using Wikipedia and you should see what conic constant means. ]lA.?
fX}dQN~z
m-R ` (
|
|