你明白后工作距的物理意義就知道怎么控制了 4l:+>U@KU 透鏡最后一個面到像面的距離 QaV*} W 所以你限制好最后一個空氣間隔的長度為90就可以了
hopebox
2011-01-12 17:56
Using Operand TTHI should do the job for you. If you take a look of the example, Double Gauss 28 degree field.zmx, in ZEMAX and using the settings shown in the following picture, you will notice the TTHI returned is the distance between the last refractive surface and the image plane is returned. Hope this solves the question you had.
hopebox
2011-01-12 17:56
My apologies, no picture but set surf 1 and Surf 2 = 11 in the aformentioend example.
