附件中所示，最后一面理想透鏡前應該出射平行光，由于原始出射的光為近似的平行光，所以理想透鏡前不是平行光入射。想請哪位高人幫忙優化優化。要求平行光入射到理想透鏡上，出射光的視場為24度或小于24度。

學習學習，下來看看~~

學習一下

學習了，    

學習學習，下來看看~~

下來看看 Y?zo")  

My suggestion would be setting surf 34 as image surface for optimization using operand IMSF and followed by default RMS Angular Radius criterion. These operands are to be added onto your current merit function. Another thing, it might be a good idea to replace RMS Wavefront error by RMS Spot Radius to start with. c|(Q[=   
/5 OQ0{8p  
Quite likely you will need to place some constraints on on surface radius, but the principle should work. See some of the resutls here. (Unfortunately I can't send the files.  

repost the layout including paraxial lens

下來看看

學學這個系統，有沒有什么好東西呢。