大家好！ 'v@*xF/L6a  
有關Grid Distortion的問題，我設設計超短焦距投影鏡頭的時候，我發現Field Curvature and Distortion Plot和Grid Distortion相差很大，Grid Distortion在選擇最大視場是畸變?yōu)?3%，尓Field Curvature and Distortion Plot里的Distortion在-2%到+2%之間，見圖，有漸暈。 qA[cF$CIl)  
scTt53v^  
請問：我怎么用優化算子優化呢！ ;.<HpDfG_  
rxs:)# ?A  
DIST、 DIMX、 DISC、 DISG我都用了，還是不行，望大家給予指導！謝謝！ R\Ckk;<$  

仔細查閱zemax的定義的畸變和網格畸變

畸變沒有問題

Grid Distortion視場選擇有問題

Zemax裏的說明，Grid Distortion不適用於field為real image height及半視場角>=90度的情形。 &}|`h8JA]K  
樓主是否正好是這種情形?
B/^o$i  
R=$}uDFmW  
ZEMAX cannot compute the distortion in the manner described here if the field type is real image height. The reason is that when using real image height, ZEMAX iterates each ray trace to find the exact field coordinate to hit the desired image coordinate; implicitly removing the distortion. As a workaround, ZEMAX automatically changes the field type from real to paraxial image height for the purposes of this computation. This change is significant if the distortion is large. Note the value for "Field Width" will then be in units of paraxial image height rather than real image height. TJ>1?W\Z  
rx@i.+  
Grid distortion can not be calculated if the field units are angles and the maximum angle equals or exceeds 90 degrees. This limitation is due to the assumption that the predicted image height is proportional to the tangent of the field angle in object space. When the field angle exceeds 90 degrees, the tangent does not predict the linear image height correctly. a;nYR5f  

謝謝各位的幫助， 我再好好理解理解

已經很不錯了啊

了解先

f-theta鏡頭如何優化